OUTDOOR SEAL COATING & STRIP/RESEAL
*OUR PROCESS FOR STRIPPING & RE-SEALING:
1) strip off old sealer and/or hardened polysand and marks with a stripper compound and powerwash off, tarping off as needed
2) degrease over the area and powerwash again to remove residue
3) 24 - 48 hrs. later we sweep and blow area, clean up, then roll on super diamond clear sealer and paint brush hard to reach areas and joints and let set for 24 -48 hrs. until use
STRIP OFF OLD SEALCOAT AND RE-SEAL = $3 / sq. ft.
SEALCOATING OF MOST OUTDOOR SURFACES = $1.50 / sq.ft.
BRICK/BLOCK/STONE/COPING REPAIR & MAINTENANCE
Re- joint sand with regular tan sand = 50 cents/sq.ft.
Re- joint sand with polysand (gray or tan) = 75 cents/sq.ft.
Power wash then Re- joint sand with regular tan sand = 75 cents/sq.ft.
Power wash then Re - joint sand with polysand (gray or tan) = $1/sq.ft.
Paver Repair any brick or stone = $2 - $3/ sq.ft. depending on situation
Wall/Step/Coping Repair of any style = $8 - $10 / FaceFt. (1ftx1ft section) depending on situation